FOXBORO P0900EX

Welcome, thank you for your trust, The seller has more than $1526000 worth of industrial control products inventory.hope we can help you solve your problem!!!

  We Can transport to the world!!!

*******************************************************

FOXBORO P0900EX Controller module In Stock

To acknowledge the alarm or diagnostic, press the Shift + Ack (∇) key. This action acknowledges

 the error condition and clears the error history buffer. You may first wish to view an 

explanation of the problem in Status mode. If you acknowledge the error in Status Alarm or 

Status Diagnostic, each of the errors in the history buffer will appear on the display for one 

second before being cleared from the buffer. A contact input may also be configured to 

acknowledge an alarm. If so, the buffer is also cleared by the contact input.

The unit is shipped with the Write Protect Switch in the disable position, which disables write 

protection and permits you to make configuration changes. Refer to MI 021-387 for a more 

detailed description of this switch.

If you have difficulty making changes, check to see if the switch is in the disable position.

In Setup (configuration) mode, you will need to move through a structure of parameters 

(using the arrow keys) to view and/or change the value or status of a particular parameter. 

Structure diagrams, located in Appendix A, will aid you in doing this.

The Up- and Down-arrow keys will also enable you to scroll through a menu in either direction.

 You may do this one position at a time or continuously through a menu or string of values

 by holding the key in the depressed position.

The following example will show you how to use the keys in moving through the structure 

and in editing several parameters. For the example, we will configure the transmitter for a 

pulse rate URV of 150.7 GPM at a rate maximum frequency of 5000 Hz. In following this 

procedure, refer to Figure 3. We will begin at the Level 3 Output menu.

Product details:

FOXBORO P0900EX Controller module

Contact information：

Contact person：Luna Chen

Email Address:：sales6@saulplc.com

WhatApp： +86 13358378970

We look forward to your inquiry and will get back to you as soon as possible.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！