Emerson DeltaV KJ3001X1-CA1

Welcome, thank you for your trust, The seller has more than $1526000 worth of industrial control products inventory.hope we can help you solve your problem!!!

  We Can transport to the world!!!

*******************************************************
Emerson  DeltaV KJ3001X1-CA1 Power module In Stock

The socket weld-ends are prepared by 

boring in each end of the valve a socket 

with an inside diameter slightly larger 

than the pipe outside diameter. The pipe 

slips into the socket where it butts 

against a shoulder and then joins to the 

valve with a ffllet weld. Since a ffllet weld 

does not fully penetrate the valve-pipe 

connection, some non-destructive 

methods are not used for these valves. 

Socket weld ends in any given size are 

dimensionally the same regardless of 

pipe schedule. They are usually furnished 

in sizes through NPS 2 (DN 50).

The butt weld-ends are prepared by 

beveling each end of the valve to match 

a similar bevel on the pipe. The valve 

ends are then joined to the pipeline and 

joined with a full-penetration weld. This 

type of joint can be used on all valve 

styles. The end preparation is different 

for each schedule of pipe. These are 

generally furnished for control valves in 

sizes NPS 2-1/2 (DN 65) and larger. Care 

must be exercised when welding valve 

bodies in the pipeline to prevent 

excessive heat transmitted to valve trim 

parts. Trims with low-temperature 

composition materials must be removed 

before welding.

Product details:

Emerson  DeltaV KJ3001X1-CA1 Power module

Contact information：

Contact person：Luna Chen

Email Address:：sales6@saulplc.com

WhatApp： +86 13358378970

We look forward to your inquiry and will get back to you as soon as possible.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！